SEP sesam BSR

(C)SEP AG, C. Ruoff

Copyright 1999-2009 by SEP AG. All Rights reserved.

Any form of reproduction of the contents or parts of this manual is allowed only with the express written permission from SEP AG. When compiling and designing user documentation SEP AG uses great diligence and attempts to deliver accurate and correct information. However, SEP AG cannot issue a guarantee for the contents of this manual.

System Requirements

• SEP sesam Server Version 3.4.1.52 or later
• SEP sesam Client 3.4.1.41 or later
• SEP sesam - Clientpatch
• SEP BSR Windows CD from Version 2.0 with Windows Kernel
• A fully functional DNS Server (if this is not available all entries must be made in the local hosts files).
• Before starting SEP BSR Windows you must perform a 'Driver Control' operation to determine required drivers for the recoverable system. This is described CBMR Driver validation section.

Installing the SEP sesam Client

• A fully installed and functional SEP sesam Client for Windows is required before starting to utilize the SEP BSR Windows extension. The installation package can be found here.
• After installing the client you must unzip the data from

Clientpatch and copy them to <SYSTEM ROOT>\sesam\bin\sesam (replace the existing files).

Installing SEP BSR

• Insert the SEP sesam BSR Disk into the CD drive of the system where the Disaster Recovery mode will be used.

The 'Installation Program' should start automatically. If the program does not start automatically please use the command:

Next, please select the required installation (i.e. Server or Desktop) and choose OK. Now select the full Installation along with Standard Configuration.

During the Installation you should not change any settings in the dialogue boxes. Also when the program prompts you for for the User Account, this should be left empty.

• Answer the question after the the start of the CBMR Schedulers with "YES" and click Continue.
• The installation path can be set depending on your system environment. The installation will not require more than 30 MB of disk space.

• After the successful installation you must copy the license file data from SEP Software LLC purchased license from the Basis Directory to SEP BSR, e.g. C:\Programme\Cristie\CBMR thus overwriting the demo license file.
• All data from the directory SESAM from the BSR CD must be present in the Basis Directory from SEP BSR e.g. C:\Programme\Cristie\CBMR.

• After the installation of SEP BSR you must start the CBMR program. User either the Desktop symbol CBMR or the command: Start>Programme>Cristie>CBMR and confirm with OK. Then click on Configuration and open Backup Locations and close the program.

CBMR Driver validation

• After the installation of SEP BSR it is absolutely necessary to systematically follow the next steps to ensure an error-free restore of the system environment and backed up data.

• Therefore run the included program Driver validation found in the directory Programme\cristie, which was installed with the previous procedure.

In this screenshot several Hardware Components have been included under one 'Yellow Dot'. The 'Yellow Dot's indicate that the these Drivers have been included in the BSR Boot-CD. In the event a 'Red Dot' appears it is up to the System Administrator to determine if the missing Driver is required for a successful Disaster Recovery. If the 'Red Dot' indicates a Network I/F Card or a Disk/SATA/Raid Controller special action should be taken. If a Data Restore is performed without first testing the manual Driver Installation the restore is not covered under warranty or guaranteed. It is possible as in a normal Window's Installation using the Install CD to install these drivers using "F6" during the bootup operation. To assure that this report has been technically verified, SEP offers the opportunity to create a logfile using the switch Create Driver Info. Attach the relevant customer information and date and label "SEP AG" and forward it to support@cristie.de and copy 'CC' support@sepsoftware.com. Our partner Cristie will issue a technical statement regarding this event.

Configuring a SEP BSR Backup

As a starting point it is important to consider the following: The Backup is started as in every SEP sesam backup, on the Server. It can be included under a Group and in the scheduler (SEPuler) and can be performed within the standard backup routines.

Configuring a BSR Task using the SEP Sesam GUI

• Include the target backup client as O/S Type: Windows
• If the client lies within a fire walled DMZ you must select the necessary firewall option in the GUI
• Create a Test File Backup (e.g. from C:\temp) to assure the validity of the client backup task
• Now, set up the SEP BSR task

Within the SEP sesam GUI under the Menu Tasks/Clients you must select SEP BSR Client and create a new task with the following: Task Name; Backup Type; Client and Source. This will be dealt with in the next section.

Example selection of the BSR Backup source

For a SEP BSR Backup the following selections my be set under 'Source':

• minimal
• system drive
• all

• When minimal is selected for the BSR Backup only the Windows operating system settings, i.e. the system_state and the requisite Boot files are backed up.

• Selecting systemdrive creates a complete Backup of all system partitions and all open files. This backup includes the complete system_state (incl. AD) from the Server.

• If all as the 'Source' is selected all local devices as well as logical SAN connected devices will be backed up.

The new Task can be included in a Group or in the scheduler where current, active file or database backup tasks have been setup.

When and How Sould SEP BSR Backup Be Used?

In most cases combining the types of backups for a SEP BSR Backup will be most effective. By using both the Source selections "systemdrive" and a SEP sesam File Backup by selecting Source "all" allows the user the possibility to restore a system in the shortest time possible to an identical system or to new hardware. It is also is also possible to simply filter out only the desired data and restore it to the new system.

Disaster Recovery and Restore with SEP BSR

To begin the Disaster Recovery process the SEP BSR CD must be inserted and the server should be started with the Boot option set to DVD/CD drive. After booting, the 'Welcome' screen from Cristie will appear and must be verified with "W". During the next step the Windows kernel will be loaded along with all required Drivers to start the new system. The following display will be the License Agreement between Cristie and the user and must be accepted before proceeding. If acceptable, please check I ACCEPT and proceed to the next step.

After the successful boot up procedure follow the subsequent directions.

• The Restore is started by clicking the "Recovery Manager" Button.
• Skip the next Window by clicking "next".
• In the next menu (see Picture) you will need to select the backup location and configure it within the network>

• Using the Button "Network setup" you will be able to set up the IP Configuration at "IP Addresses". In this location you will enter the IP Address of the recovered Server, this is used in the event there is no DHCP Server.

• If there is a DHCP Server, you should enter the correct host name and the subsequent set in the last section "Network Identification" .

• If there is no DHCP Server all additional data should be entered correctly in these fields.
• All these Settings must be confirmed by selecting 'Apply' and checking 'OK' when prompted.

• After confirming all Network settings you will return to the next menu window. Select here the first choice "Stored with the backup data".
• Hit "next" and in the next menu and "SEP sesam Location".
• Select "next" and click "create new" and enter the settings as they are in the next screenshot.

• Click "OK" to verify input. With the newly created location and "Next" you will come to the selected and up to date run and stored SEP sesam backups.

• Select the desired backups continue by clicking "Next".

Now the BSR client will select "SM_STPD"or "System Information" prepared via the SEP sesam. Using this function allows the user to select all partitions required from within the chosen backup. With one right click on the partition in the window on the right you have the possibility to select a further option format or do not format. This is due to the fact that a formatting is neither needed or desired.

• In the next step the chosen partitions will be formated and prepared for restore to the server.

• After partitioning all data from the SEP sesam Server is transferred using the SEP sesam STPD Protocol to the BSR client (Disaster Recovery Target!).

• In the final step all previously stored (backed up) data are restored or backed up to the selected data storage devices.

• After the successful restore please select "close" to exit the Status Window.

• The required Reboot may now be be selected from the Main Menu.

In the event that a new activation of the operating systems is required it is possible that a hardware device has been changed.

If you have any restore issues or problems please contact us at support@sepsoftware.com

Additionally, if you have any problems or recommendations with our documentation and procedures please report them to support@sepsoftware.com

Further Links/Literature

• Clientpatch for SEP sesam Client 3.4.1-41