Add removable media to SEP sesam under Linux

In this example 3 USB-media are added to the SEP sesam environment. With the use of storage pools it is possible to mount the USB hardware into the filesystem with SEP sesam (dynamic mount).

Configuration

1. Create a mountpoint in the Linux-System

2. Connect the first USB-media

3. Create a media pool, for example USB_DISK_POOL

• Size: At least the size of all Hd's belonging to that pool (for example for 3 Hd's a 100GB min. 300GB)
• Directory: /opt/sesam (to be used as a dummy value), since the control is managed over the respective storage pools

4. After saving the media pool-definition, reopen this media pool for further edits and mark the option use Storage Pools

5. Create a storage pool for every USB-media and configure it as shown below:

Add the created storage pools to the media pool from the pick list as shown below.

6. If neccesary add a new media type to the SEP sesam DB (in this case we add a 100GB IBM USB HDD)

Go to “NEW” an add a new media type with the following properties

7. Then the USB-media can be attached as media successively via Components->Media->Initialize. For that the appropriate media must be connected to the system. During the implementation of the USB media a directory is cretated in the root-path of the media.

The USB-media is mounted dynamic to the filesystem with the mount and unmount function. If the dynamic mount function should not be used, the fields Load command, Unload command and Device path can be left blank.